旋转闪蒸干燥机

※由于物料受到离心、剪切、碰撞、摩擦而被微粒化呈高度分散状态及气固间的相对速度较大，强化了传质传热，使该机生产强度高。
※干燥气体进入干燥机底部，产生强烈的旋转气流，对器壁上物料产生强烈的冲刷带出作用，消除粘壁现象。
※在干燥机底部高温区，热敏性物料不与热表面直接接触，解决了热敏性物料的焦化变色问题。
※由于干燥室内周向气速高，物料停留时间短，达到高效、快速、小设备大生产
※干燥室内设置旋流片，以控制物料水份达到极低水平。
※干燥室上部分分散器可以控制出口物料的粒度及温度。
※ The material is acted by centrifugal force, shearing force, impact and friction, the particle is very small and is in high degree distributing state. Meanwhile the relative speed between air and solid is big, it strengths mass and heat transmission. So it makes the machine has high output.
※ The hot air will enter into the bottom of the dryer and produce vigorous eddy airflow. it will produce strong washing out and bring out effect to material and eliminate the phenomenon of adhering wall.
※ At the area of high temperature at the bottom of dryer, thermal sensitive material does not contact with hot surface. It solves coking and discoloring problem of thermal sensitive material.
※ Because high cycle speed and short staying time of material in drying chamber, high efficiency and big production of small equipment can be got.
※ There is eddy piece in drying chamber. It can control moisture of material at lowest level.
※ The distributor at up part of drying chamber can control size and humidity of material at outlet.

★XSG　技术参数:Technical Data

型号 specification	干燥器筒体直径（mm）Dia of dryer	主机尺寸（mm） Size of main machine	主机功率（kw） Power of main machine	处理风量（m 3 ） Volume of air	蒸发水量（kg/h） Vaporized capacity	占地平面尺寸（mm） Occupied area
XSG-2	φ 200	φ 300X2800	0.75-2.2	300-800	10-20	3500X2500
XSG-3	φ 300	φ 400X2800	1.5-3	600-1500	20-50	3800X2700
XSG-4	φ 400	φ 500X4200	3-4	1250-2500	25-70	4000X3000
XSG-5	φ 500	φ 600X3200	5.5	1500-4000	30-100	4200X3200
XSG-6	φ 600	φ 700X5300	5.5-7.5	2500-5000	40-150	4250X3250
XSG-8	φ 800	φ 900X5800	7.5	3000-8000	60-200	4500X3500
XSG-10	φ 1000	φ 1100X6200	7.5-11	5000-12500	100-300	4750X3750
XSG-12	φ 1200	φ 1300X6500	11-15	10000-20000	150-500	5000X4000
XSG-14	φ 1400	φ 1500X6700	15-18.5	14000-27000	200-600	5250X4250
XSG-16	φ 1600	φ 1700X6000	22	18700-36000	250-800	5500X4500