真空干燥机

※真空下物料溶液的沸点降低，是蒸发器的传热推动力增大，因此对一定的传热量可以节省蒸发器的传热面积；
※蒸发操作的热源可以采用低压蒸汽或废热蒸汽（用户特殊要求选用水或油加热，厂方可为你专门设计。）
※适用于在高温下易分解，聚合和变质的热敏性物料的干燥；
※在干燥前可进行消毒处理，干燥过程中任何不纯物均无混入；
※由于是静态式真空干燥器，故干燥物料的形体不会损坏。

※ Under the condition of vacuum, the boiling point of material solution will be reduce. It will increase impetus for heat and mass exchange. Therefore for certain heat exchange amount, it can save heat exchange area of evaporator.
※ The heat source for evaporating operation may be low pressure steam or waster heat steam （If having special requirement, customer may choose water or oil to heat. Our factory can design specially for you）.
※ Heat loss of evaporator may be reduced.
※ Suitable for drying thermal sensitive material that is easy to decompose, polymerize or denature.
※ Before drying, it can carry out disinfections. During the period of drying, any impurity cannot be mixed into it.
※ It is static vacuum dryer, the form and structure of material to be dried and cannot be damaged.

FZG/YZG型　技术参数:Technical Data

规格 Specification	YZG-600	YZG-1000	YZG-1400	FZG-15
干燥箱内尺寸（㎜） Inner size of drying chamber	φ 600X976	φ 1000X1527	φ 1400X2054	φ1500X1400X1220
干燥箱外尺寸（㎜） Outer size of drying chamber	1135X810X1020	1692X1190X1500	2386X1675X1920	1513X1924X2060
烘架层数 Layer amount of baking frame	4	6	8	8
层间距离（㎜） Distance between layers	81	102	102	122
烘盘尺寸（㎜） Size of baking disk	310X600X45	460X640X45	460X640X45	460X640X45
烘盘数 Qty of baking disk	4	12	32	32
烘盘管内使用压力 Pressure used in pipe of baking disk	≤ 0.784（8kg/cm）	0.784	≤ 0.784	≤ 0.784
烘架使用温度（℃） Top baking frame to be used	35-150	35-150	35-150	35-150
箱内空载真空度（ MPa ） Vacuum in idle in chamber	≤ 0.098	≤ 0.098	≤ 0.098	≤ 0.098
用冷凝器时，真空泵型号 When use condensator, model and power of vacuum pump	2X-15A 2Kw	2X-30A 3Kw	2X-70A 5.5Kw	2X-70A 7Kw
不用冷凝器时，真空泵型号 When not use condensator, model and power of vacuum pump	SK-0.8 2.2Kw	SK-3 5.5Kw	SK-3 5.5Kw	SK-3 5.5Kw
干燥箱重量（ kg ） Weight of drying chamber	250	800	1400	2100